Team R2R | Jan 31 2015 | 2.4 MB
When recording an instrument with more than one mic, sound tends to reach each microphone at a slightly different time and thus cause some frequencies to cancel each other while other frequencies can build up unnaturally. This phenomena is known as the comb filter effect. 当仪器记录与一个以上的麦克风,声音往往在一个稍微不同的时间到达各个麦克风,从而导致一些频率相互抵消而其他频率可以不建立。这种现象被称为梳状滤波效应。 Until now, compensating for the delay between the microphones had to be done manually - an extremely time consuming and inaccurate process. 直到现在,补偿麦克风之间的延迟必须手工做一个非常耗时和不准确的过程。 Overview 概述 When recording an instrument with more than one mic, sound tends to reach each microphone at a slightly different time and thus cause some frequencies to cancel each other while other frequencies can build up unnaturally. This phenomena is known as the comb filter effect. 当仪器记录与一个以上的麦克风,声音往往在一个稍微不同的时间到达各个麦克风,从而导致一些频率相互抵消而其他频率可以不建立。这种现象被称为梳状滤波效应。 Until now, compensating for the delay between the microphones had to be done manually - an extremely time consuming and inaccurate process. 直到现在,补偿麦克风之间的延迟必须手工做一个非常耗时和不准确的过程。 Enter Auto-Align. 进入自动对齐。 Auto-Align will "listen" to your multi-mic recording and automatically measure and compensate for the delay between the microphones, or between a DI box and a microphone - sample accurately, significantly reducing the comb filter effect and dramatically improving the resulting sound. 自动对齐将“听”到你的多麦克风录音和自动测量和补偿麦克风之间的延迟,或者在底盒和麦克风-样本准确,大大降低了梳状滤波器效应,极大地提高了产生的声音。 When distant microphones are used and a delay is desired to enhance the sense of space, Auto-Align can time-place the microphones to better match the close-mic'ed source and therefore minimize the comb filter effect. Auto-Align can also automatically detect a reversed polarity mic and compensate for it. 当遥远的麦克风使用和延迟是理想的提升空间感,自动对齐可以把麦克风以更好地匹配close-mic'ed源,因此减少梳状滤波效应。自动对齐,还可以自动检测极性相反的MIC和赔偿。
下载:
|