York Audio – MRSH 412 MV30-Dual (WAV) [IR library]经典双排采样

流云高飞 · 发表于 2022-7-27 00:00:00

York Audio MRSH 412 MV30双排驾驶室组件基于1999年Marshall 1960bv 4×12机柜，配备原装Celestion G12老式扬声器。在寻找1960bv的过程中，我们听了四个来自不同年份、经历了不同音乐旅程的橱柜。这间办公室有一点让人立即振奋。通常，当我们制作一个包装时，我们会选择声音最好的扬声器，但这个橱柜有两个声音完全不同且音质独特的扬声器，这使得几乎不可能选择最好的扬声器……因此，我们必须同时使用这两个扬声器，而不是只选择一个。

The York Audio MRSH 412 MV30-Dual Cab Pack is based on a 1999 Marshall 1960bv 4×12 cabinet with original Celestion G12 Vintage speakers. In search of 1960bv, we listened to four cabinets from different years with different musical journeys. There was something about this office that was instantly inspiring. Normally when we create a package, we choose the speaker with the best sound, but this cabinet had two speakers with completely different sounding and unique sound qualities, which made it almost impossible to choose the best speaker… so instead of choosing just one, we had to use both.

Microphones used in this Cab Pack

此驾驶室组件中使用的麦克风

Dynamic:

动态：

->57m – Based on a modern Shure SM57

->57m–基于现代舒尔SM57

->57v – Based on a vintage Shure Unidyne III SM57

->57v–基于老式舒尔Unidyne III SM57

->58 – Based on a Shure SM58

->58–基于舒尔SM58

->SM7 – Based on a vintage Shure SM7

->SM7–基于老式舒尔SM7

->421m – Based on a modern Sennheiser MD421

->4.21亿–基于现代森海塞尔MD421

->421v – Based on a vintage Sennheiser MD421

->421v–基于老式森海塞尔MD421

->906 – Based on a Sennheiser e906

->906–基于Sennheiser e906

Ribbon:

功能区：

->121- Based on a Royer R-121

->121-基于Royer R-121

->160 – Based on a Beyerdynamic M160

->160–基于Beyerdynamic M160

->313 – Based on a Shure KSM313

->313–基于舒尔KSM313

->N22 – Based on an AEA Nuvo N22

->N22–基于AEA Nuvo N22

Condenser:

冷凝器：

->U47 – Based on a Telefunken U47 large diaphragm tube microphone

->U47–基于Telefunken U47大振膜管话筒

->184 – Based on a Neumann KM 184 small diaphragm microphone

->184–基于Neumann KM 184小型振膜话筒

Ambient:

环境：

->ROOM 1, 2, 3, L, and R – Captured with a Telefunken U47

->房间1、2、3、L和R–用Telefunken U47捕捉

->REAR 1 and 2 – Captured with a Telefunken U47

->后部1和2–用Telefunken U47捕捉

->SIDE – Captured with a Telefunken U47

->侧面-用Telefunken U47捕捉

->SUM – Captured with a Telefunken U47

->SUM–用Telefunken U47捕捉

->All Cab Packs come in .WAV format in 24-bit 96k, 48k, and 44.1k files.

->所有Cab包都以24位96k、48k和44.1k文件的.WAV格式提供。

->All IRs are 500ms for maximum resolution. Hardware units that require shorter files will automatically truncate 500ms files to the unit’s preferred length upon import.

->所有IRs的最大分辨率均为500ms。需要较短文件的硬件单元将在导入时自动将500ms文件截断为该单元的首选长度。

->Natural Phase and Minimum Phase versions are provided.

->提供自然相位和最小相位版本。

->Fractal Audio™, Line 6™ Helix, Atomic™ Amplifire, and most IR loading amp modelers utilize 48k files.

->分形音频™, 第6行™ 螺旋，原子™ Amplifire和大多数IR加载amp建模器使用48k文件。

->Kemper™ units ulitize 44.1k files.

->肯珀™ 单元使用44.1k文件。

->Strymon™ Iridium and BOSS™ units utilizes 96k files.

->斯特里蒙™ 铱和BOSS™ 单元使用96k个文件。

游客，如果您要查看本帖隐藏内容请回复